Use the APRS-K2 cable to push transmissions over a speaker system:Įasily play audio over a intercom or speaker system from your handheld. Set up VOX on your radio to accept any form of incoming audio – such as a Push-to-talk application on a Phone – or a Line-out application from your computer. Use the APRS-K2 cable as a Mic In Connector: The APRS-K2 cable is built with a custom circuit board that will automatically adjust the audio for clear packet transmissions with minimal adjustment along with protecting your devices from strong over modulated signals.Īlong with allowing APRS functionality the APRS-K2 cable can provide a simple interface gateway to allow several features to your radio!īy connecting the APRS-K2 cable between your radio and any recording (line-in) device. The BTECH APRS-K2 Cable will quickly connect your radio to APRS by using virtual TNC (app driven) on your tablet or device. Plug in the cable, turn on the VOX, and you’re pretty much set to go.īTECH APRS-K2 TRRS / APRS Cable A simple way to start using APRS by using devices you already own. The APRS-K2 cable uses a virtual TNC found in several apps, such as APRSDroid, APRS.fi, and Pocket Packet. This adapter allows cable to connect to earlier 3.5MM TRRS standards, such as Nokia. Also included with the APRS-K2 is a Reverse Adapter to insure compatibility with all devices. One end of the cable uses the Kenwood style K2 connector, while the opposite end is terminated with a TRRS connector. The APRS-K2 cable allows you to interface your handheld transceiver with your existing mobile device, including. I’ve been wanting to get involved with APRS for a while now, and this made it extremely easy. It’s long overdue, but there’s finally a TRRS/APRS cable available for radios using a standard Kenwood style K2 connector.

Using fldigi on kenwood d710